Most trades owners can tell you exactly how many calls went out yesterday and which tech is running behind. Ask current financial ratios for trades contractors, and you usually get a polite look, like we just asked for their blood type.
That’s fair. If you search for construction company financial ratios, most of what comes up is written for general contractors bidding big commercial jobs, with a lot of talk about backlog, bonding, and percentage of completion. An HVAC, plumbing, or electrical shop that lives on service calls, change-outs, and a few new construction jobs needs a shorter list that fits how the money actually moves.
We’d narrow it to six numbers. None of them take a finance degree, and all of them should come straight out of books that are kept right.
The six that earn their keep are the current ratio, gross margin by job type, overhead rate, days in receivables, debt to equity, and revenue per technician. Together they answer the questions owners actually lose sleep over: can we pay the bills, are we pricing right, are customers paying us, and is it time to hire?
You’ll notice net profit isn’t on the list. It matters a great deal, and we covered where it usually lands in our post on how profitable an HVAC business should be. The six here are the numbers underneath it, the ones that explain why net profit came out the way it did.
One honest warning before we start. A ratio is only as good as the books it comes from. If parts get coded to the wrong account or payroll for the office manager lands in job labor, every number below will look better or worse than it really is.
Your current ratio is your current assets divided by your current liabilities. In plain terms, it’s the cash you have plus what customers owe you, compared to what you owe in the next year: vendor bills, payroll, credit card balances, and the next twelve months of truck payments.
A ratio under one means you owe more in the short term than you have coming in, and that’s a problem even when the business is profitable. Comfortably above one gives you breathing room. Lenders look at this number too, so it’s worth knowing yours before you walk into the bank, not after.
For a seasonal trade, the timing of the check matters as much as the number itself. An HVAC shop’s current ratio can look great in August and thin in March, and both are normal.
What you want to see is the ratio holding up as you go into the slow months, which is the same idea behind our post on how much cash to keep in your business. A strong current ratio doesn’t mean much if it shrinks every winter.
Gross margin is what’s left from a job after the direct costs: the tech’s time, the parts, and the equipment you put in. Most shops look at it as one number for the whole company, and that single number hides more than it shows.
Service calls, maintenance agreements, replacements, and new construction all earn very different margins. When they’re blended together, a strong service department can quietly carry a new construction contract that’s barely breaking even, and nobody notices until a slow quarter.
Let’s look at an example. Picture a Fort Worth plumbing shop doing about $1.8 million a year, with a blended gross margin that looks healthy. Split the jobs out by type and service and repair work is earning a strong margin, while a builder contract that makes up about a third of revenue is running thin, because the bid didn’t account for return trips and a lot of waiting on other trades. If the owner was planning to grow that builder relationship, the split changes the plan: reprice the contract at renewal and put the extra crew time toward service.
That split only works if your bookkeeping tags revenue and job costs by job type. If yours doesn’t, our Fort Worth bookkeeping team sets that up as part of the monthly work. Margins show you where the money lands, but they don’t tell you what it costs just to keep the doors open.
Your overhead rate is everything that isn’t tied to a specific job, divided by revenue or by billable hours. That covers office staff, rent, insurance, software, marketing, and the trucks and tools that sit in the shop when nobody’s using them.
The per-hour version is the one we find most useful for pricing. Say your monthly overhead runs $40,000 and your six techs bill about 720 hours between them in a month. That’s roughly $56 an hour in overhead before you’ve paid the tech or bought a single part. If your hourly rate was set by looking at what the shop down the road charges, it may not cover that.
This is also why billable hours matter so much. If those same six techs only bill 600 hours in a slow month, overhead jumps to about $67 an hour, because the rent doesn’t care how busy you were. Watching this number month to month tells you when to raise prices and when the real problem is too much drive time and too many unbilled callbacks.
Days in receivables tells you how long, on average, it takes customers to pay you. You take what customers owe you, divide it by your revenue for the period, and multiply by the number of days in that period.
If you billed $150,000 last month and customers owe you $75,000 right now, you’re sitting at about 15 days. Homeowners who pay on the spot keep this number low. Builders, property managers, and commercial accounts on 30 or 60-day terms push it up fast.
The off-season is where slow payers do the most damage. In July, a big receivable from a property manager is annoying. In February, when calls are down and payroll hasn’t changed, that same receivable can be the difference between a calm month and a stressful one. If your days in receivables keeps creeping up, it’s usually time to tighten your terms, collect a deposit on bigger jobs, or have someone actually call the slow accounts each week.
Debt to equity compares everything the business owes to what’s actually yours, meaning what’s left after you subtract liabilities from assets. It’s the ratio that tells you how much of your company the bank owns.
Trades shops tend to carry a fair amount of debt, and a lot of it is perfectly reasonable. Trucks, a line of credit for the busy season, and equipment loans are normal. The number gets worrying when it climbs year after year, or when owner equity goes negative because draws have been running ahead of profit for a while.
That second one surprises owners more than anything else on this list. The business looks fine, the bank account has money in it, and the balance sheet says you’ve taken out more than the company has earned. A bank reviewing a loan request will see that right away, so it’s better that you see it first.
Revenue per technician is your total revenue divided by the number of field techs, and it’s the clearest way to tell if your crew is busy or just booked. It also answers the question every growing shop eventually asks: do we need another tech, or do we need to get more out of the ones we have?
A tech costs a lot more than their paycheck. The Bureau of Labor Statistics puts the median annual wage for HVAC mechanics and installers at $61,010 as of May 2025, and that’s before payroll taxes, benefits, the truck, the tools, and the training. Each tech has to bring in enough to cover all of that, pay for their share of the parts, carry their share of overhead, and still leave something for the company.
When revenue per tech is rising, and your schedule is booked out, hiring usually makes sense. When revenue per tech is flat or falling while everyone feels slammed, adding someone tends to spread the same work thinner. In that case, dispatch, pricing, or callbacks are usually the place to look first.
Once a month is the right rhythm for most shops, as long as your books close on time. Gross margin by job type, overhead rate, and days in receivables move fast enough that a monthly look actually catches problems early. The current ratio and debt-to-equity can be checked quarterly, with a closer look going into your slow season.
The trick is comparing each number to itself over time rather than to a magic target. A shop with a falling current ratio and rising days in receivables is telling you something, even if both numbers still look fine on their own. If your current books can’t produce these six without a weekend in a spreadsheet, that’s usually a sign the setup needs work, and it’s a big part of what a contractor CPA should be doing for you each month.
If you liked this one, you’ll probably also like How to Read Your Profit and Loss.
Want to see your six numbers side by side?
Get in touch with Adam Traywick, and we’ll take a look at your books together.
Until next time!